Investigation of the variability in the tool marks produced by modified blank firing pistols on fired 7.65 mm projectiles.

Firearms identification has an important place in forensic ballistic investigations since the weapons are widely used in criminal offences. Firearm examiners resolve many case files, through the use of automatic systems or comparison microscopes. Advanced forensic technologies like BALISTIKA helps to record and analyze non standard ballistic evidence. In today's world, with the ease of access to materials and production technique information, pistols modified from blank firers are frequently encountered as crime tools. In this study, the characteristics of 7.65 mm fired cartridge cases obtained by controlled shots from blank firing modified pistols were examined, and their detection performances were compared by means of the Balistika system. Although distinctive differences are not expected after successive test shootings, balistically important changes were seen after the use of blank firing modified pistols and the 3D imaging system proved to be useful in observing such differences. The analyses showed that the modifications in weapons lead to variation in the ballistic characteristics and reduce the accuracy of the detection performance, which may result in flawed forensic decisions. It was also found that the deviations in ballistic impressions of modified blank firing pistols were greater than that of standard fabricated and hand-made pistols. This unique study contributed to the forensic sciences literature by focusing on the impact of modified weapons on ballistic characteristics.

The effects of four different solvent vapours on the restoration of obliterated stamp markings from five different wooden surfaces.

The stamp markings on wooden surfaces, which are placed on trees and products including antiques, indicate the status of trees and involve identifying data regarding the products. Such markings are obliterated either to facilitate illegal logging or to conceal product information. Despite the wide literature on the restoration of obliterated characters on metal and polymer surfaces, the recovery of defaced characters on wooden surfaces appears to be understudied. Several reference texts in the forensic marks' examination literature suggest that water, water vapor, and alkaline solutions are useful in restoring the abraded markings on the wood. Since there does not seem to be any experimental study proving such success, this study aimed to fill this gap. This study conducted experimental research by using water, ethanol, ammonia, and chloroform to recover the scraped characters on samples obtained from walnut, beech, spruce, oak, and cedar trees. The cold-stamped characters, which were defaced at varying depths, were restored using vapor and liquid phases of four solvents. While the vapor phases of water, ethanol, and ammonia yielded good outcomes on all types of wooden surfaces, the liquid phases did not seem to be useful in the revisualization process. The response of the vapors, which varied between 62 and 220 s, depended on the type of wood. The restoration technique developed in this research offers the possibility of on-site usage, easy application, utilization of low-cost solvents, rapid recovery, and effectiveness on various wooden surfaces. Overall, the restoration methodology used in this research appears to be fruitful in retrieving identifying information on wooden samples.

The performance of automatic ballistics identification system, BALISTIKA, for 7.62 mm × 39 mm cartridge case correlation.

The one-by-one examination of the increasing Open Case File (OCF) archive by comparison macroscope has become a time-consuming process and the last quarter of the 20th century witnessed the development of automated ballistic identification systems. After the utilization of these systems, government institutes, scholars and the companies devising such systems conducted various performance tests to analyze duration and correlation. The performance of BALISTIKA and similar automated firearms identification systems are frequently measured using the pistol cartridges. This study brings a new perspective to automated ballistic identification system performance tests through using same and different brand steel 7.62 × 39 mm cartridge cases. The performance of BALISTIKA system was measured using 4387 comparison cartridge cases according to breech face, firing pin, ejector marks and combined evaluation criteria. It was determined that correlation performance of BALISTIKA for the same brand cartridges are higher and ejector marks are the most distinct matching criteria for 7.62 × 39 mm steel cartridge cases. The test results are presented under the headings of weapon-manufacturer countries, automated ballistic identification system matching criteria for both same and different cartridge brands.

Comparison of the class and individual characteristics of Turkish 7.65 mm Browning/.32 Automatic caliber self-loading pistols with consecutive serial numbers.

Firearms identification is based on the fundamental principle that it is impossible to manufacture two identical items at the microscopic level. As firearm manufacturing technologies and quality assurance are improving, it is necessary to continually challenge this principle. In this study, two different makes of 7.65 mm Browning/.32 Automatic caliber self-loading pistols of Turkish manufacture were selected and examined. Ten pistols with consecutive serial numbers were examined and each fired 10 times. The fired cartridge cases were recovered for comparison purposes. It was found that for each make of pistol, the individual characteristics within the firing pin impression, ejector, and breech face marks of all 10 pistols were found to be significantly different.

An investigation into whether or not the class and individual characteristics of five Turkish manufactured pistols change during extensive firing.

In order to assess whether or not the class and individual characteristics of a firearm change over time, five different makes of Turkish self-loading pistol were tested and were each fired a large number of times. The class and individual characteristics were identified for each pistol and the first fired cartridge case was compared with the subsequent consecutive 250th fired cases for each pistol. It was found that there were slight changes in some of the individual and class characteristics; however, this was not statistically significant and did not affect the ability of the firearms examiner to match the first fired case to the last fired case for each firearm tested.

Modified shotguns in Turkey from 2006 to 2008.

This study investigates the legal status of modified shotguns in Turkey by examining the cases submitted to the Aydin Regional Criminal Laboratory between January 2006 and August 2008. A total of 351 shotguns used in crimes were examined. These guns were evaluated in respect of their type, size, caliber, fitness for use, and legal classification. Eleven percent of these shotguns had been modified and it was found that 55% of the modified shotguns were classified according to law 6136 and qualified as a pistol and 45% were classified according to law 2521 and qualified as nonstandard shotguns. Within the Turkish criminal justice system, a nonstandard shotgun attracts a less stringent sentence than a pistol. It would therefore appear that this sentencing structure is considered when modifying shotguns in Turkey. This is clearly a loop-hole in the legislation that could perhaps be investigated and closed.

Modification methods of blank pistols in Turkey in 2006.

This study describes the modification methods of blank cartridge firing pistols in Turkey. We have examined cases submitted to the Aydin Regional Criminal Laboratory of Turkey in 2006. In total, 95 modified pistols and 300 modified cartridges were examined. The blank cartridge firing pistols are guns which look similar to "real" pistols, however, there are blockages in their barrel in order to prevent the discharge of a bullet. However, as a result of simple modifications, these pistols can be easily converted into "real" firearms. Studied modification methods are removing the obstruction from the barrel, removing the partial obstruction from the barrel, sleeving a smaller diameter tube into the original barrel, using a replacement barrel, and rifling the original barrel. Special cartridges for these modified pistols are also produced. These modified pistols and cartridges were evaluated in respect of the converting methods.